Table of Contents
Advertisement
Rack PDM Charger
Installation and Operation Manual
5. MAINTENANCE
5.1 OPERATION WHEN THE CHARGER RACK IS
CONNECTED TO A PDM OR DEVICE MANAGER
When the charger is connected the following additional operations can be done:
•
Software upgrade (of charger or handset)
•
Parameter editing (of charger or handset)
•
Phonebook upload (handset)
•
Language upload (handset)
See Installation and Operation Manual for WinPDM or CPDM3/WSM3 for more
information.
5.2 SOFTWARE UPDATE
The charger software is pre-installed. Updates can be performed by using the WinPDM
or CPDM3/WSM3.
The software version of the charger can be checked as follows:
1
Open WinPDM or the Device Manager CPDM3/WSM3.
2
Go to the Devices tab.
3
In the list of devices, find the charger.
4
The software version is shown in the Software version column.
See Installation and Operation Manual for WinPDM or CPDM3/WSM3 for more
information.
5.3 EASY REPLACEMENT
NOTE: This section is not applicable for the Basic Charger Rack.
The Charger Rack supports the Easy Replacement feature. Easy replacement is
performed via the handset display and does not involve WinPDM or CPDM3/WSM3.
The Rack PDM Charger only needs a power connection to support easy replacement.
A connection to WinPDM/CPDM3/WSM3 is not needed.
See the User Manual for the handset more for details.
5.4 LED INDICATIONS
The charger is equipped with a status LED. The following indications are used:
LED indication
None
21/1531-ANF 901 43 F 2017-04-25
Description
Not connected to power.
20
Advertisement
Table of Contents
