Fuel System; Construction - Toro GrandStand 74504TE Service Manual

Specifications

Fuel System

Fuel Capacity
Fuel Shut-Off Valve
Fuel Tank
2
Fuel Gauge
Mounting

Construction

Engine Base
Carrier Frame
Hydro IHT Mounting
Control Tower
Deck Lift System
Traction Control
Platform
Unit Tie Down
2-2
10. 6 Gallons
In line between fuel filter and fuel tank
Blow-molded .080 in. wall
N/A-Natural tank color.
Located inside the tower and constrained by bolt-on bracket.
1/4 in. (.250) thick 50 ksi.
3 x 1.5 x 11 gauge (0.130 in.) wall tube welded to 7 GA 0.1793 in., side plates
with 0.3125 in. mounting plates. Frame includes deck lift mounts, battery box,
front caster fork hubs and tie downs.
.250 in thick 50 ksi steel plates welded to frame tubes.
(2) 12 gauge (0.10) thick panels, (1) 10 gauge (right side ) and (2) 0.75 O.D. x
11 gauge (0.12) wall steel tube reference bars. The control tower bolts to the
carrier frame.
The lift system has 4 contact points. Two at the front of the deck and two rear
of the deck. Lifting is aided by the use of one extension springs. Deck height
adjustments are in 0.25 inch increments from 1.5 inch to 5 inch measured at
the blade tip.
Toro Twin Lever Control System
1.00 O.D. X .120 Wall high strength (50 ksi) steel formed tube welded to 10
gauge (.13) steel sheet. The platform is covered with a vinyl/neoprene anti-
fatigue mat. The platform is able to swing into an upright position and locked
for transport.
3/8 in. diameter rod loop, 4.50 in. wide, welded to rear of frame and sides of
front carrier frame tubes.
TORO®- Grandstand Service Instruction Manual