Toro GrandStand 74504TE Service Manual page 28

13. Repeat for opposite side.
14. Place the knob shaft through the hole in the tower.
Secure with acorn nut.
15. On stud outside of tower, place composite friction
washer, slide bushing, and lock washer. Add the
knob.
16. Repeat for opposite side of tower.
NOTE: Platform assembly is complete.
17. Attach platform assembly to 3rd hole in tower from
back (easier to have two people when attaching),
torque flange nut to 30 +/- ft. lbs.
18. Repeat for opposite side of tower.
19. Tighten knobs on the tower.
TORO®- Grandstand Service Instruction Manual
CHASIS
3
3-13