Spindle Assembly - Toro GrandStand 74504TE Service Manual

MOWER DECK

Spindle Assembly

1. Prior to assembly, inspect all parts for chips, burrs
and any foreign material.
2. Use fixture to press the outer ring of the upper
bearing against the bearing stop.
3. Place the spacer in the spindle housing.
4. Insert the bearing into the spindle housing.
NOTE: Push until the bearing touches the spacer.
5. Insert the spindle shaft into the spindle housing.
6. Place the spindle hub assembly over the spindle
shaft.
7. Place washer over the spindle hub assembly.
8. Secure with lock nut.
NOTE: Torque nut to 120 +/- 5 ft. lbs.
7
7-6 TORO®- Grandstand Service Instruction Manual