Table of Contents
Advertisement
Checking the
Spark Arrester
(if equipped)
Service Interval: Every 50 hours
WARNING
Hot exhaust system components may ignite
gasoline vapors even after the engine is
stopped. Hot particles exhausted during
engine operation may ignite flammable
materials. Fire may result in personal injury
or property damage.
Do not refuel or run engine unless spark
arrester is installed.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Wait for muffler to cool.
4.
If any breaks in the screen or welds are
observed, replace arrester.
5.
If plugging of the screen is observed, remove
the arrester and shake loose particles out of
the arrester and clean screen with a wire brush
(soak in solvent if necessary). Reinstall the
arrester on exhaust outlet.
Fuel System
Maintenance
Changing the Fuel Filter
A fuel filter is installed in the fuel line between the fuel
tank and the engine. Replace when necessary.
28
Advertisement
Table of Contents
