Toro TimeCutter 74502 Setup Instructions
Z riding mower
Hide thumbs
Also See for TimeCutter 74502:
- Operator's manual (40 pages) ,
- Operator's manual (40 pages)
Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
TimeCutter
Model No. 74502—Serial No. 220000001 and Up
Model No. 74601—Serial No. 220000001 and Up
Model No. 74701—Serial No. 220000001 and Up
Model No. 74801—Serial No. 220000001 and Up
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
Description
Bolt, 1/4 x 3/4 in.
Washer, 1/4 in.
Nut, 1/4 in.
Seat
Knob
Flat washer, 5/16 in.
Left-hand control lever
Right-hand control lever
Bolt, 3/8 x 1 in.
Curved washer, 3/8 in.
Hose coupling
Key
Operator's Manual
Engine Operator's Manual
Registration card
2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Z Riding Mowers
Qty.
Use
2
2
Installing the battery
2
1
2
Installing the seat
2
1
1
Installing the motion control levers
4
4
1
Washing the underside of the mower
1
1
Read before operating the machine.
1
1
Fill out and return to Toro.
1
Form No. 3327-133 Rev A
Setup Instructions
All Rights Reserved
Printed in the USA
Advertisement
Related Manuals for Toro TimeCutter 74502
Summary of Contents for Toro TimeCutter 74502
-
Page 1: Loose Parts
Washing the underside of the mower Operator’s Manual Read before operating the machine. Engine Operator’s Manual Registration card Fill out and return to Toro. 2001 by The Toro Company 8111 Lyndale Avenue South All Rights Reserved Bloomington, MN 55420-1196 Printed in the USA... -
Page 2: Activating The Battery
Activating the Battery 6. Charge the battery for 1 hour at 25 to 30 amps or 6 hours at 4 to 6 amps (Fig. 2). Do not overcharge the battery. Bulk electrolyte with 1.260 specific gravity must be purchased from a local battery supply outlet. Warning Danger Charging the battery produces gasses that can... -
Page 3: Checking The Side Discharge Chute
4. Slide the shoulder bolts on the bottom of the seat into the slots on the seat support (Fig. 5). Secure the seat to the seat support with the flat washers and knobs removed in step 2 (Fig. 5). m–5215 Figure 3 1.