/reset
plus any other
button
/reset
1 s
42/73
Building Technologies Division
14.2
Meaning of symbols on the display
Fault status message
Flame present
Valve controlled
Ignition controlled
Fan motor controlled
Oil preheater on
Heat request from controllers
Parameter setting mode
Info mode
Service mode
Actuator closing
Actuator opening
Unit of current display
Figure 21: Meaning of display
14.3
Special functions
14.3.1
Manual lockout
The reset must be carried out as follows:
Basic Documentation LME39...
14 Operation via the AZL2...
P
V
h min s
together with any other button.
Press
/reset
The basic unit switches instantly to the lockout
position, no matter what the operating position.
The display shows the fault status message.
Example: Error code 10
(Refer to chapter Error code list)
When the
/reset
second, rESEt appears on the display.
When the button is released, the basic unit is
reset.
%
button is pressed for 1
CC1P7106en
08.12.2017