Table of Contents
Advertisement
NOTE: Right & left hand designations are based on sitting in the tractor & facing forward. When you are behind the coulter looking
forward, the right hand coulter is assembled with the blade & gauge wheel to the right hand of the arm assembly. The left hand
coulter is assembled with the blade & gauge wheel to the left hand of the arm assembly.
Coulter travel is 5 5/8"
Minimum height underneath the toolbar for 18" blade: 23 1/16" (From underneath the toolbar to the lowest edge of the blade)
Minimum height underneath the toolbar for 20" blade: 24 1/16" (From underneath the toolbar to the lowest edge of the blade)
Coulter angle is 7 degrees, a 2 degree shim can be used to reduce the coulter angle to 5 degrees
Coulter down pressure range:
Coulter Travel
.844" Pushrod Exposed
.750" Pushrod Exposed
.844" Light Duty Spring
.844" Pushrod Exposed
.750" Pushrod Exposed
.844" Light Duty Spring
.844" Pushrod Exposed
.750" Pushrod Exposed
.844" Light Duty Spring
Gauge Wheel Depth Adjustments
o 18" Blade – Position 1 = 1 ½", Position 2 = 2 3/8", Position 3 = 3 ¼", Position 4 = 4 1/8", Position 5 = 5"
o 20" Blade – Position 1 = 2 ½", Position 2 = 3 3/8", Position 3 = 4 ¼", Position 4 = 5 1/8", Position 5 = 6"
NOTE: If using a 13" gauge wheel, gauge wheel depth position 4 and 5 are NOT to be used.
6
GENERAL INFORMATION
Examine all equipment carefully for shipping damage or shortages.
1"
598 lbs.
752 lbs.
541 lbs.
717 lbs.
291 lbs.
380 lbs.
428 lbs.
520 lbs.
394 lbs.
498 lbs.
224 lbs.
271 lbs.
308 lbs.
351 lbs.
284 lbs.
330 lbs.
161 lbs.
187 lbs.
2"
3"
4"
901 lbs.
1033 lbs.
866 lbs.
1006 lbs.
458 lbs.
522 lbs.
612 lbs.
692 lbs.
590 lbs.
673 lbs.
317 lbs.
353 lbs.
392 lbs.
429 lbs.
372 lbs.
411 lbs.
210 lbs.
226 lbs.
5"
Pushrod Position
1180 lbs.
TOP
1154 lbs.
TOP
579 lbs.
TOP
765 lbs.
MIDDLE
759 lbs.
MIDDLE
388 lbs.
MIDDLE
483 lbs.
BOTTOM
549 lbs.
BOTTOM
239 lbs.
BOTTOM
Advertisement
Table of Contents
