Yetter Nutrient Pro 4000 Series Operator Installation & Instruction Manual page 16

DANGER: ALWAYS INSTALL ALL SAFETY LOCK UPS & LOCK PINS BEFORE WORKING UNDER THE TOOLBAR.
1. Store the machine in an area away from human activity
2. Store the machine in the RAISED position.
3. Install service locks on all wheel cylinders.
At the end of the season, the machine should be thoroughly inspected & prepared for storage.
Repair or replace any worn or damaged components to prevent down time at the start of the next
season. Store the machine under cover with all parts in operating condition.
 Clean machine thoroughly to remove all dirt, debris, fertilizer spatter, and crop
residue, which would hold moisture and cause rusting.
 Inspect machine for worn or broken parts. See your Yetter Farm Equipment dealer
during the off-season so that parts or service can be acquired when machine is not
needed in the field.
 Lubricate bearings as outlined in the Lubrication section
 Paint all parts which are chipped or worn and require repainting.
 Store machine in a clean, dry place with the planting unit out of the sun.
 If the machine cannot be stored inside, cover with a waterproof tarpaulin and tie
securely in place.
 Do not allow children to play on or around the machine
16
MAINTENANCE
Storing the Equipment