Table of Contents
Advertisement
Examine all equipment carefully for damage or shortages.
2986-125 Avenger with Standard Mount
2986-124 – Avenger Main Arm Box
2986-126 – Avenger Standard Mount Kit
2571-200 – 25" Coulter Blade
2986-122 Avenger with 4 X 4 Mount
2986-124 – Avenger Main Arm Box
2986-123 – Avenger 4 X 4 Mount Kit
2571-200 – 25" Coulter Blade
NOTE: Right hand coulter can be converted to left hand coulter and left hand coulter can be converted to
right hand coulter.
Optional Equipment Available: 2986-108 – Skid Shoe Kit.
Lubricate all bearings and moving parts as you assemble and see that they work freely.
NOTE: When you are behind the coulter looking forward, the right hand coulter is assembled with the blade to
the right hand of the arm assembly. The left hand coulter is assembled with the blade to the left hand of the arm
assembly.
READ THESE INSTRUCTIONS FIRST:
1.
Improperly tightened bolts will result in damage, breakage, expense, and down time.
2.
Always replace bolts with the specified grade and type.
3.
Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts are staying
tight.
4.
The chart below is a guide for proper torque. Use it unless a specified torque is called out elsewhere in the
manual.
5.
Torque is the force you apply to the wrench handle or the cheater bar, times the length of the handle or bar.
6.
Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.
4
GENERAL INFORMATION
2920-012 – 12" Smooth Disc Sealer Kit
2984-005 – 13 5/8" Notched Disc Sealer Kit
2920-016 – 16" Smooth Disc Sealer Kit
2984-009 – Sealing Wheel Kit
2920-016-N – 16" Notched Disc Sealer Kit
Advertisement
Table of Contents
