Advertisement
Note: Right Hand and Left Hand designations are based on sitting in the tractor and
facing forward.
READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts
are staying tight.
4. The chart below is a guide for proper torque.
elsewhere in the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the
handle or bar.
6. Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.
Lubricate all bearings and moving parts as assembled and make certain that they work freely.
WARNING:
without using safety lockups.
CAUTION:
attention should be paid to lifting techniques while handling and or maneuvering the
units during assembly. Failure to do so may lead to personal injury. Use heavy gloves
while handling the blades during assembly and any time adjustments or maintenance
operations are made to the units.
GENERAL INFORMATION
BOLT TORQUE
Never work around the toolbar / implement while in a raised position
2920 MAX SEALER PLUS™ unit has sharp blades.
The
Use it unless a specified torque is called out
Extra
5
Advertisement
