LogTag Recorders TREL30-16 Product User Manual page 38

Hibernating a TREL30-16
A hibernated logger has no active display; however, a button press will wake the logger up
briefly. The display will show:
the low battery symbol
l
the text not rdY if the battery is OK, and the logger can be re-activated at a later
l
point
To use the logger again for recording data, it must be re-configured with LogTag
Analyzer.
A hibernated TREL30-16 can also be activated again by pressing and holding the
buttons together for a period of 6 seconds. During this time the text not rdY appears
and the symbol flashes. Release the buttons when the flashing stops.
READY
You can re-activate a logger with a low battery, however it is not recommended to
commence another trip.
Note: The real time clock is not running in a hibernated logger and must be set up
if the logger is manually activated. Therefore, the
automatically invoked (see
Once the clock has been set, the logger is ready to be started again.
TREL30-16 User Guide
if the battery requires replacing
Adjusting the Display Clock on
procedure is
CLOCKADJ
page 18).
38
®
and