Stopping The Trel30-16; Automatically; Push-Button Stop - LogTag Recorders TREL30-16 Product User Manual

Stopping the TREL30-16

If you keep holding the
l
will be retained.
Releasing the button within the 6-second period after the initial press switches to
l
the first review screen.
A min/max reset mark will be recorded in the logged data. The logger will now track new
min/max values, with the first update shown as soon as the next reading is taken.
You will be able to see in the chart in LogTag
cleared, but you will not be able to review previous min/max values on screen once they
have been cleared.
Stopping the TREL30-16

Automatically

The TREL30-16 automatically stops recording temperature when the maximum number of
readings specified during configuration has been reached. Your unit can also be set up to
stop automatically when it is downloaded. This option needs to be set up at the factory
and cannot be changed during configuration with LogTag
supply more information about this option.

Push-button stop

You can configure a TREL30-16 so it can be stopped with the
feature is useful when you take the logger out of a shipment and don't want to falsify the
statistics with readings taken after the shipment completion. The stop function is enabled
in the Advanced Options
stop the unit:
Press and hold the
After approx 2 seconds the
TREL30-16 User Guide
REVIEW
/MARK
dialogue during configuration. When enabled, following will
button. The
REVIEW
/MARK
symbol turns off.
button, the currently stored min/max values
®
Analyzer when the min/max values were
®
Analyzer. Your distributor can
REVIEW
symbol shows.
STOPPED
button. This
/MARK
35