Power Save - LogTag Recorders TREL30-16 Product User Manual

Ultra-low temperature recorder with display

Table of Contents

During Recording

After downloading the TREL30-16 with LogTag

probe is disconnected are shown as --.- in the data list. The chart in LogTag

will show a gap during this period.

If the probe was disconnected for a complete day, the minimum and maximum statistics

for that day will show

Power Save

When

Power Save

buttons have been pressed for 30 seconds.

This function is appropriate in applications where you don't need to look at the display

frequently, such as in transit monitoring applications, as the logger uses less battery

power when the display is not turned on.

Pressing any button will re-activate the display.

Power save

is enabled or disabled when configuring the TREL30-16 via LogTag

in the

Advanced Settings

TREL30-16 User Guide

on the display and --.- in the list.

is enabled, the display will automatically switch off if none of the

tab.

Analyzer, any readings taken while the

Analyzer

Table of Contents

Do you have a question about the TREL30-16 and is the answer not in the manual?