Appendix 1 - Battery Replacement - LogTag Recorders TREL30-16 Product User Manual

Appendix 1 - Battery Replacement

Appendix 1 - Battery Replacement
Prepare the Logger
Download the unit in LogTag
l
Analyzer to save any stored data.
Hibernate the unit.
l
Failing to hibernate the logger may
result in serious memory
corruption. As a result you may no
longer be able to use this product.
Remove the old battery
Carefully remove the rear label
l
covering the battery door using a
small-bladed screwdriver or knife:
Turn the battery door anti-clockwise
l
and remove it from the case:
Remove the battery using a small-
l
bladed screwdriver, as shown:
Insert the new battery
Only use batteries from a reputable
manufacturer! Check the
temperature range of the battery
and make sure it covers the range of
the TREL30-16.
TREL30-16 User Guide
®
You can use the
new battery for
this, as it will fit
into the slot
Place a new CR2032 cell into the
l
battery compartment as shown; the
right-hand edge of the battery is
inserted first against the contact:
Press firmly down on the left-hand
l
side of the battery to click the battery
into place:
Replace the battery door; turn
l
clockwise to lock it into place (using
the old battery).
Cover the battery door with either a
l
new label (Part # 100-000502) or
reuse the old one.
Re-configure the logger with LogTag
l
Analyzer.
Please recycle or dispose of the old
battery according to your local
environmental regulations.
42
®