EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Supplement Manual page 3

IN WARNINGS, CONT'D.
This system is made from aluminum. Aluminum is electrically conductive. Do not lay power cords on or
across electrically conductive materials, such as this system. Do not use system near exposed wiring or
hang lights or extension cords from system.
Use caution when using the system. Ensure hair, clothing, shoelaces, jewelry, and other personal
items are not and do not catch on anything that may create a hazard.
Do not lean on, walk on, or otherwise bear weight on the system until installation is complete.
Use system only with a qualified helper.
Before each use, remove dirt, leaves, and all other items and debris that may have accumulated.
Sweeping will often suffice, but for more concentrated cleaning, use a garden hose and a damp
cloth or soft brush with mild soap and water (avoid alkaline detergents). Rinse well and use extra
caution when system surface is wet.
If snow and or ice is present on the system, remove accumulations before use. Please refer to
'DEICING' section for more information.
Before each use, confirm the system is level and positioned securely. Periodically check for ground
shifts and make any necessary adjustments.
Do not sit, stand, or climb on guards, gates, or handrails.
Only walk on the step. Never play, run, jump, or climb, on or around.
Properly support and restrain the system in transit or storage.
For additional care, usage, or general safety information, please call 1-800-451-1903.
ATTENTION INSTALLER and END USER
Prior to use, read and understand this manual and all other applicable manuals, including
supplements and addendums, if any, and warning labels, in their entirety. Learn and understand the
location and function of all features, Rated Loads, safety devices, and labels before use. If you do
not understand which manuals apply, or their content, do not use the PATHWAY® HD Code
Compliant Modular Access System and call 1-800-451-1903 for further information.
Leave this Installation Manual with the end user.
Fill out online warranty registration.
IMPORTANT SHIPPING INFORMATION
The shipment contains a packing list. Confirm all items are present before starting installation. Open
shipping boxes and inspect for damage or missing parts. If damaged or missing parts are noted, DO
NOT INSTALL OR USE.
Check for shipping damage immediately upon receipt and note any freight damage on freight bill
while driver is still present. Contact shipper right away with any freight damage concerns. In most
cases, freight damage claims will not be allowed unless noted on the freight bill. Pictures of damage
before the unit is unpacked can be very helpful.
TOOLS TYPICALLY REQUIRED
 POWER DRILL
 7/16" SOCKET OR 7/16" WRENCH
 1/2" SOCKET OR 1/2" WRENCH
 5/16" SOCKET OR 5/16" WRENCH
 RAT TAIL AND FLAT FILE
Installation Supplement for PATHWAY® HD Steps
TORPEDO OR CARPENTER'S LEVEL

#2 PHILLIPS HEAD SCREWDRIVER

1/8", 3/8", AND 13/32" DRILL BITS

5/32" AND 3/16" ALLEN WRENCHES

25' TAPE MEASURE

PLIERS

HACKSAW

C-CLAMPS

BOX KNIFE

RUBBER MALLET

Page 3 of 29