Section 4: Step Handrails - EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Supplement Manual

IN STEP HANDRAILS
4.
4.1. This section discusses the various loops and handrail components that are available for the step.
FIG. 4.1a Lower Loop Left Hand
FIG. 4.1b Lower Loop Right Hand
FIG. 4.1c Extended Lower Loop Left Hand
FIG. 4.1d Extended Lower Loop Right Hand
FIG. 4.1e Upper Transition Bend Left Hand
FIG. 4.1f
FIG. 4.1g Upper Loop
FIG. 4.1h 90° Bend is available in 13-1/4", 26-1/2", and 38-3/4" lengths (field-trim as needed)
FIG. 4.1i
FIG. 4.1j
LOWER LOOP – LEFT
FIG. 4.1a
UPPER TRANSITION BEND – LEFT
FIG. 4.1e
90° BEND
FIG. 4.1h
Installation Supplement for PATHWAY® HD Steps
Extended lower loops are intended for use in localities where code requires the
lower loop to extend 12" level in addition to the one tread depth at the slope of
the step
Upper Transition Bend Right Hand
1-1/2" Diameter Handrail (field-trim to length)
Center Handrail Bracket Pair (used on steps 42" and higher only)
LOWER LOOP – RIGHT
FIG. 4.1b
UPPER TRANSITION BEND – RIGHT
FIG. 4.1f
FIG. 4.1i
EXTENDED
LOWER LOOP – LEFT
FIG. 4.1c
HANDRAIL
EXTENDED
LOWER LOOP – RIGHT
FIG. 4.1d
UPPER LOOP
FIG. 4.1g
CENTER HANDRAIL BRACKET (PAIR)
FIG. 4.1j
Page 11 of 29