EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Supplement Manual page 14

IN
4.12. Attach center handrail brackets to center 1-1/2" square pickets using 5/16"-18 x 2-1/4" button head
socket cap screws, 5/16"-18 locknuts, and 5/16" flat washers oriented as shown (FIG. 4.6). Tighten
securely.
4.13. Attach center handrail bracket to the step handrail using a 1/4" x 1" long self-drilling, self-tapping
pan head Phillips screw (FIG. 4.7).
4.14. Tighten all fasteners securely.
4.15. Repeat the process for installing the center handrail bracket on the opposite side of the step.
4.16. If installing a step on the 5-ft (nominal) side of a PATHWAY HD platform, skip to 'RETURNING
HANDRAIL AT CLOSURE' section.
FIG. 4.6
FIG. 4.7
Installation Supplement for PATHWAY® HD Steps Page 14 of 29