6.0
Maintenance and service
Fig. 6
7.0
Trouble-shooting
Malfunction
●
Chair does not start up
In the case that any malfunction, please immediately inform your authorised ATMOS service.
14
Possible cause
– Mains plug is not connected correctly
– No mains voltage
– Defective fuse
Except the possible exchange of fuses, the ATMOS patient
chair E1 is maintenance-free (see chapter 6.1).
Nevertheless, if a functional defect should appear, please inform
the authorised ATMOS service.
6.1
Fuse exchange
●
Open the fuse support (
clockwise,
●
exchange the fuse,
●
close the fuse support again by turning it clockwise.
It is absolutely necessary to disconnect the chair from
the mains supply prior to exchanging the fuse!
Solution
– Check connection at the socket
– Check house fuse
– Check mains plug on perfect fi t at the
device
– Exchange the fuse
, fi g. 6) by turning it anti-