Advertisement
3. Enter ip address 192.168.1.1 255.255.255.0 to assign an IP address to the VLAN interface
using a 24-bit subnet mask.
4. Enter no shutdown to activate the VLAN interface to pass data.
5. Enter exit to return to the Global Configuration mode.
6. Enter ip route 0.0.0.0 0.0.0.0 192.168.1.254 to add a default route to the route table.
0.0.0.0 is the default route and the default subnet mask, and 192.168.1.254 is the next-hop
IP address to which the AOS unit will send all of its traffic. You will need to enter the proper
route, subnet mask, and gateway for your network. This information is typically provided by
an Internet service provider (ISP) or local network administrator.
7. Enter do write to save the current configuration.
C
L
HANGE
OGIN
1. To modify a current user account or create a new account, from the (config)# prompt, enter
the command username <username> password <password>.
2. To modify the Enable mode password, from the (config)# prompt, enter the command
enable password <password>.
3. To modify the Telnet password, from the (config)# prompt, enter the command line telnet
0 4 and then press <Enter>. Enter the command password <password>.
4. Enter do write to save the current configuration.
A
GUI
CCESS THE
If you connect the switch to a network with a Dynamic Host Control Protocol (DHCP) server, you
can connect to the Web interface using either 10.10.10.1 or the DHCP-assigned IP address. The
DHCP server assigned IP address will bring up the Virtual Local Area Network (VLAN) interface
and then the secondary IP address (10.10.10.1) will also be responsive.
C
Y
ONFIGURE
The applications you will need to configure vary by product and by network. Review the list of
defaults for your unit before deciding what applications to configure. At the end of this document
is a list of configuration guides that relate to common applications that should be configured on
startup. These guides are all available online on
g
NOTE
Important: For additional details on product features, specifications, installation, and safety, refer
to the
NetVanta 1550 Series Hardware Installation Guide
munity.adtran.com.
617101524F1-13B
P
ASSWORDS
A
OUR
PPLICATION
ADTRAN's Support
at
https://supportcom-
Community.
3
Advertisement
