Figure 3-29. Location Of The Locking Hole; Figure 3-30. Fitting The Transport Lock Of The Tip Comb Holder - Thermo Scientific KingFisher Flex User Manual

Thermo Fisher Scientific
2. Insert the transport lock screw of the tip comb holder with transport lock
tag first by adjusting the screw into the lock position so that both the
holes are opposite each other and aligned with the thread in the
Figure 3–29
chassis (
instrument and not so visible. Then fasten the screw by turning it firmly
Figure 3–30
clockwise (
Figure 3–29. Location of the locking hole
Figure 3–30. Fitting the transport lock of the tip comb holder
How to pack the instrument for transportation
). Note that one of the holes is inside the
).
Thermo Scientific KingFisher Flex User Manual
Installation
Locking hole
37