Table of Contents
Advertisement
General Specifications
Model Name
Imager
Maximum number of Video out pixels
(H) x (V)
Optical Size
Scanning area (H) x (V) [mm]
Pixel size (H) x (V) [μm]
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
Minimum illuminance(*1)
Power supply
Power consumption(*2)
Interface
Transmission speed
Image output format
Maximum Frame rate
(*2)
Dimaensions
Mass
Lens mount
Flange back
Camera body grounding
insulation status
F1.4, Gain +24dB, Video level 50%
(*1)
at all pixels readout
(*2)
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
BC302LMG
2048×1536
1/1.8 type
7.12×5.33
4:3
700lx，F5.6，1/52s
6lx
(*it is possible to supply the power to the camera, from Camera Link connector
with Power over Camera Link standard or I/O connector)
CameraLink Base Configuration
41.5 / 64 / 83 MHz x 1 / 2 / 3 tap
Mono8 / Mono10 / Mono12
56.13 fps
29mm(W) x 29mm(H) x 26.5mm(D) (Not including protrusion)
Conductive between circuit GND and camera body
20 / 69
BC505LMG
CMOS image sensor
2448×2048
2/3 type
8.50×7.09
3.45×3.45
Progressive
Global shutter
400lx，F5.6，1/32.62s
DC12 V ± 10%
1.8W (Max)
36.00 fps
Approximately 45g
C mount
17.526mm
* Underbar is factory default
http://www.toshiba-teli.co.jp/en/index.htm
6:5
3lx
D4272607A
Advertisement
Table of Contents
