Specifications - Toshiba teli BU132M Manual

6.

Specifications

6.1 Electrical specification
Model Name BU132M
Imager CMOS image sensor
(H) x (V) 1280 x 1024
Number of effective pixels
Scanning area (H) x (V) [mm] 6.78 x 5.43 (1/1.8 type)
Pixel size x 5.3 x 5.3
(H) (V) [μm]
Scan method Progressive
Electronic shutter method Global shutter
Aspect ratio 5:4
Sensitivity 500lx, F5.6, ExposureTime:16,000usec (1/62.5s)
Minimum illuminance F1.4, Gain +18dB, Video level 50%
2lx
Gain MANUAL
Setting range 0 to +18dB (factory setting : 0dB)
Black Level -25 to 25% (factory setting : 0% [ 0LSB@8bit ])
Gamma γ=1.0 to 0.45 (factory setting : γ=1.0)
LUT Input 10 bit, Output 10 bit
Image Buffer 256M Byte
15 channels
User Setting Memory
User Free Memory 64 Byte
Test Pattern Black, White, Grey A, Grey B
Horizontal ramp waveform, Vertical ramp waveform, Grey
scale(factory setting : OFF)
Power supply
DC +5V5% (from USB connector)
Power consumption(*1) 1.7W (maximum)
(*1) at the all pixel readout
16
D4256795C
Copyright © 2016 - 2019 Toshiba Teli Corporation, All rights reserved. http://www.toshiba-teli.co.jp/en/index.htm