AcquisitionControl
AcquisitionControl features are related to image acquisition.
Acquisition frame rate is variable. Maximum acquisition frame rate depends on camera operation mode.
(scalable, CameraLink Tap, CameraLink CLK, etc.)
TriggerControl
TriggerControl features are related to image acquisition using trigger.
This camera series provides two kinds of exposure synchronization.
1. Normal Shutter mode
2. Random Trigger Shutter mode
In Random Trigger Shutter mode, two kinds of trigger input are available.
1. Trigger signal via the CC1
2. Trigger signal via the I/O connector
The following table shows the combination of operation mode of this camera series.
Trigger Mode
Normal Shutter mode
Random Trigger Shutter mode
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
: Free run operation (internal synchronization)
: Synchronized with external trigger input
Operation Mode
Synchronization
Free run
'ExposureTime' register control
-Edge mode:TriggerSequence0
-Bulk mode:TriggerSequence6
HardwareTrigger
-Level mode:TriggerSequence1
* The camera operation not mentioned above is not supported.
51 / 69
Exposure Control
'ExposureTime' register control
Trigger pulse width control
http://www.toshiba-teli.co.jp/en/index.htm
D4272607A