Status / Expanded Status; Baudrate - Toshiba teli BC Series Instruction Manual

Status / Expanded status

(Legacy protocol only)
If returned [NAK] at sending command to camera, the error status is wrote to status register and expanded
status register.
● Note
The register value and content are described as follows:
Status
(0x69)
0x00
0x02

Baudrate

(GenCP Only)
If GenCP used, the baudrate is possible to change.
*In Legacy protocol used, the baudrate is fixed 9600 bps.
Register Read
address Write
0x0001 0000 R.O.
0x0001 0004 R/W
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
Expanded Classification
status
(0x6A)
0x00 No Error
0x01 General
Accessing Error
0x02
0x03
0x04
Memory Default Register name
Save
0x91 Supported Baudrates
－
0x00 Current Baudrate
－
Description
No error
Accessed to reserve area.
Read access to write only register.
Write access to read only register.
The write value is out of range.
0x91 (9600, 115200, 921600bps)
Current baudrate
0x00:auto recognition
0x01:9600bps,
0x10:115200bps,
0x80:921600bps
67 / 69
http://www.toshiba-teli.co.jp/en/index.htm
Description
D4272607A