Command Commnucation Protocol - Toshiba teli BC Series Instruction Manual

Command Commnucation Protocol

BC series has Legacy protocol and GenCP as command communication protocol.
The switching of communication protocol is recognized automatically from received packet. The PC application
can communication to camera without switching operation of communication protocol. For Legacy protocol and
GenCP, BC series has multiple register for control of camera feature.
The accessing to IIDC2 registers is possible by using Legacy protocol and GenCP. The accessing to Legacy
registers is possible by using only Legacy protocol. The accessing to GenCP registers is possible by using
only GenCP.
29 / 69
D4272607A
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/en/index.htm