Specifications - Toshiba teli BU302M-ES Specifications

6.

Specifications

6.1 Electrical specification
Imager
Number of active pixels
Scanning area (H) x (V) [mm]
(V) [μm]
Pixel size x
(H)
Scan method
Electronic shutter method
Aspect ratio
Standard sensitivity
Minimum sensitivity
Gain
Setting range
Black Level
Gamma
LUT
Image Buffer
User Setting Memory
User Free Memory
Test Pattern
Power supply
Power consumption(*1)
Copyright © 2015 TOSHIBA TELI CORPORATION, All rights reserved.
(H) x (V)
Horizontal ramp waveform, Vertical ramp waveform
BU302M-ES
CMOS image sensor
2064 x 1544
7.12 x 5.36
(1/1.8 type)
3.45 x 3.45
Progressive
Global shutter
13:10
TBD
TBD
MANUAL
0 to +24dB (factory setting : 0dB)
-25 to 25% (factory setting : 0% [ 0LSB@8bit ])
γ=1.0 to 0.45 (factory setting : γ=1.0)
Input 10 bit, Output 10 bit
64M Byte
15 channels
64 Byte
Black, White, Gray A, Gray B
(factory setting : OFF)
DC +5V5% (from USB connector)
TBD
15
D4247095A
www.toshiba-teli.co.jp