TP-Link Pharos Series User Manual page 98

5.3
Note:
Wireless Client Settings submenu is only available in Access Point, Bridge, AP Router and AP Client
Router (WISP Client) Mode.
In this section, configure wireless AP parameters used for the connection with the clients.
Go to the
Enable SSID
Broadcast
Specify the security mode used for the clients to access the wireless network.
Select
data is not encrypted, but you can still authenticate clients by enabling the RADIUS MAC
Authentication function.
Page. In the
Enable or disable SSID broadcast. With this function enabled, the device
will broadcast the SSID periodically.
when you want an open network without wireless security. In this mode, network
section, specify the SSID.
94