TP-Link Pharos Series User Manual page 55

Interface
• IPv6 Routes
Destination
Gateway
Interface
3.12
Go to the STATUS page. In the
information of all the DHCP clients.
Client Name
MAC Address
Assigned IP
Lease Time
Auto Refresh
3.13
Note:
Dynamic WAN submenu is only available in AP Router Mode and AP Client Router (WISP Client)
Mode when the WAN connection type is PPPoE, PPTP, L2TP or Dynamic.
Displays the interface that the destination device is on.
Displays the IPv6 address of the destination device or destination network.
Displays the IPv6 address of the appropriate gateway.
Displays the interface that the destination device is on.
Displays the device name of the client.
Displays the MAC address of the client.
Displays the IP address that the device assigned to the client.
Displays the time that the client leased. When the time expires, the clients
will request to renew the lease automatically.
Enable or disable Auto Refresh. With this feature enabled, the table will
refresh automatically.
51
section, select DHCP Clients and monitor the