TP-Link Pharos Series User Manual page 66

Use These DNS If the ISP provides a DNS server IP address for you, Enable Use These
Servers
DNS Server, and fill the Primary DNS and Secondary DNS fields below.
Otherwise, the DNS servers will obtain automatically from ISP.
WAN MAC Specify the WAN MAC address. This field displays the current MAC
Address
address of the WAN port. If your ISP binds the MAC address of your
previous computer/router, enter the correct MAC address into this
field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is
any hexadecimal digit). Click Restore Factory MAC to restore the MAC
address of WAN port to the factory default value.
Your PC's MAC Displays the MAC address of the PC that is managing the device.
Address
Click Clone PC's MAC to set the WAN MAC address the same as your
management PC's MAC address.
Restore to Click this button to restore the WAN MAC address as factory MAC
Factory MAC
address.
Clone PC's MAC Click this button to set the WAN MAC address as PC's MAC address.
If your ISP supplies internet access through L2TP or PPTP, it will provide the following
parameters. The configurations of L2TP and PPTP are the same, and the following introduction
takes L2TP as an example.
Specify the parameters below and click Connect :
Server IP/Name Enter the server IP address or the domain name provided by your ISP.
User Name Enter the User Name provided by your ISP. This field is case-sensitive.
Password Enter the Password provided by your ISP. This field is case-sensitive.
62