TP-Link Pharos Series User Manual page 124

Australia
New Zealand
Select Recurring Mode and configure the related parameters for the device. This configuration
will be used every year.
Offset
Start Time
End Time
Select Date Mode and configure the related parameters for the device. This configuration will be
used only one time.
Offset
Start Time
End Time
Click Apply , then click Save .
7.5
Go to the
file then click Upload .
Firmware
Version
The daylight saving time of Australia is from First Sunday in October,
02:00 to First Sunday in April, 03:00.
The daylight saving time of New Zealand is from Last Sunday in
September, 02:00 to First Sunday in April, 03:00.
Specify the time to set the clock forward by.
Specify the start time of Daylight Saving Time.
Specify the end time of Daylight Saving Time.
Specify the time to set the clock forward by.
Specify the start time of Daylight Saving Time.
Specify the end time of Daylight Saving Time.
page. In the
Displays the current firmware version of the device.
section, click Browser to select a firmware