TP-Link Pharos Series User Manual page 50

3.7
Go to the STATUS page. In the
data traffic of specified interfaces including LAN, WAN, WLAN, WWAN and BRIDGE. Note
that the interfaces which you can monitor are different among different operation modes.
3.8
Go to the STATUS page. In the
information of all the stations that are connected to the device.
MAC Address
Device Name
Associated
SSID
Signal/Noise
(dBm)
section, select Throughput and monitor the current
Displays the MAC address of the station.
Displays the device name of the station.
Displays the SSID that the station is connected to.
Displays the signal strength and the noise strength of the wireless network.
There are two display modes. Values of the two chains are displayed
separately in Chain0/Chain1 Mode, and together in Combined Mode. You
can switch between display modes by clicking on it.
46
section, select Stations and monitor the