TP-Link Pharos Series User Manual page 117

Simple Network Management Protocol (SNMP) is an application layer protocol that facilitates
the exchange of management information between network devices. Main functions of SNMP
network devices, and so on.
Configure the device as SNMP Agent, and it can receive and process the management
message from the NMS (Network Management System).
Go to the
parameters and click Apply .
SNMP Agent
SysContact
SysName
Syslocation
Get Community
Get Source
Set Community
Set Source
Click Apply , then click Save .
page. In the
Enable or disable the SNMP Agent function.
Enter the textual identification of the contact person for this device, for
example, contact number or e-mail address.
Enter a name for the device.
Enter the location of the device. For example, the name can be
composed of the building, floor number, and room location.
Specify the community that has read-only access to the device's SNMP
information.
Enter the IP address of the NMS that can serve as Get Community to
read the SNMP information of this device. By default, it is 0.0.0.0, which
means an NMS of any IP address is available.
Specify the community who has the read-and-write right of the device's
SNMP information.
Enter the IP address of the NMS that can serve as Set Community to
read and write the SNMP information of this device. By default, it is
0.0.0.0, which means an NMS of any IP address is available.
113
section, configure the following