TP-Link Pharos Series User Manual page 112

Click the Setting button to specify the Auto Mail Settings.
From
To
SMTP Server
Authentication
Auto Mail
Feature
6.2
This section is used to specify miscellaneous parameters.
Go to the
features and click Apply .
Enter the sender's E-mail address.
Enter the receiver's E-mail address.
Enter the IP address of the sender's SMTP server.
Enable or disable the authentication function. If the sender's mailbox is
configured, check the box to enable mail server authentication. Enter the
sender's username and password.
Enable or disable Auto Mail Feature. With this feature enabled, specify
the way for the device to send the system log.
Page. In the
108
section, configure the following