TP-Link Pharos Series User Manual page 106

Go to the
specify the filtering rule.
Wireless MAC
Filtering
Filtering Rules
Click Add and specify the following parameters.
Enable
SSID
MAC
Comment
Click Save and click Apply . Then click Save .
5.6
This section is used to specify the advanced wireless parameters, such as Beacon Interval,
RTS threshold and DTIM Interval.
page. In the
Enable or disable the Wireless MAC Filtering function.
Specify the filtering rules.
The stations listed in the table are allowed to access the
wireless network under the rules. While others are forbidden to access.
The stations listed in the table are forbidden to access the
wireless network under the rules. While others are allowed to access.
Enable or disable the desired entry.
Select te SSID to which the filtering rules apply. In AP Mode, if Multi-SSID
is enabled, you should set different filtering rules for each SSID.
Enter the MAC address of the wireless host that you need to filter.
Enter the description information for the filtering rule
102
section, enable this feature and