TP-Link Pharos Series User Manual page 113

Discovery
CDP
Click Save .
6.3
internet gateway, for example) to check the network connectivity. If there is a connection
failure then the device will automatically reboot.
Ping Watch Dog is dedicated to continuously monitoring the connectivity to a specific host
using the Ping tool. The Ping tool sends ICMP echo request packets to the target host and
listens for ICMP echo response. If the defined number of replies is not received, the tool
reboots the device.
Go to the
configure the following features. Click Apply .
Ping Watch Dog
IP Address To
Ping
Ping Interval
Enable or disable Discovery. With this feature enabled, TP-Link Pharos
Control software can discover the device. Pharos Control is a network
management software developed independently by TP-Link and it
currently supports Pharos series products. It can centralize monitoring
and managing network devices in the network platform
Enable or disable CDP. With this function enabled, this device can share
its information with the neighboring devices that support CDP (Cisco
Discovery Protocol, a device discovery protocol developed by Cisco).
Page. In the
Enable or disable Ping Watch Dog.
Specify the IP address of the target host to which the device will send
ping packets.
Enter the time interval between two ping packets. The default value is
300 seconds.
109
section, Enable this feature and