TP-Link Pharos Series User Manual page 54

ARP is used to associate each IP address to the unique hardware MAC address of each
device on the network.
IP Address
MAC
Interface
Auto Refresh
3.11
Go to the STATUS page. In the
entries recorded by the device in the Routing table. Routing table is used for the device to
decide the interface to forward the packets. You can enable or disable Auto Refresh . With
this feature enabled, the table will refresh automatically.
• IPv4 Routes
Destination
Gateway
SubnetMask
Displays the IP address of the corresponding ARP entry.
Displays the MAC address of the corresponding ARP entry.
Displays the interface connected to the device.
Enable or disable Auto Refresh. With this feature enabled, the table will
refresh automatically.
Displays the IP address of the destination device or destination network.
Displays the IP address of the appropriate gateway.
Displays the Subnet Mask of the destination network.
50
section, select Routes and monitor the routing