Table of Contents
Advertisement
KYPD IN / KYPD OUT Connections
•
KYPD IN (Keypad In): Receives and transmits data to the panel Keypad bus/AX‑
Bus.
•
KYPD OUT (Keypad Out): Receives and transmits data out to other keypad(s) or
module(s). Install a dual‑connector harness to allow connection to other devices
up to the maximum number of devices supported.
When the 734INT is powered from 24 VDC, do not connect devices to KYPD OUT header.
Status LEDs
The 734INT board contains three status LEDs.
•
The Red LED turns on for the same duration as the door strike relay.
•
The Yellow LED turns on for one second to indicate receipt of a valid input
determined by card format programming.
•
The Green LED indicates data sent to the panel.
6
734INT Installation and Programming Guide
|
Digital Monitoring Products, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the 734INT and is the answer not in the manual?