Program The Panel; Device Setup; Device Number; Device Name - DMP Electronics 734INT Installation And Programming Manual

Access control module
Table of Contents

Advertisement

To access the Programmer menu, reset the panel, enter 6653 (PROG), then press CMD.
After completing each of the following steps, press CMD to advance to the next option.
Refer to the panel programming guide as needed.

DEVICE SETUP

DEVICE SETUP
DEVICE NO: ‑
DEVICE SETUP
*UNUSED*
Digital Monitoring Products, Inc.

PROGRAM THE PANEL

DEVICE SETUP
Advance to DEVICE SETUP, then press any select area or top
row key to enter the setup menu.

Device Number

Set the module's address. For information about valid
addresses, refer to Table 2.

Device Name

Press any select area or top row key, then enter a name for
the module.
|
734INT Installation and Programming Guide
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 734INT and is the answer not in the manual?

Table of Contents