Advertisement
5.2 PUSHBUTTONS
Icon
Button
Stop
Start
Manual Mode
Auto Mode
Mute/Reset
Alarm
Close
Open
Up/Increase
Down/Decrease
Left
Right
Set/Confirm
Exit
NOTE: Press
crank. Successful start will not be judged according to crank disconnect conditions, operator will
have to crank the starter motor manually; when operator decides that the engine has fired, he/she
should release the button and start output will be deactivated, safety on delay will be initiated.
HGM9510 Genset Parallel Unit
Description
Stop running generator in Auto/Manual mode; Lamp test
(press at least 3 seconds); Reset alarm in stop mode;
During stopping process, press this button again to stop
generator immediately.
Start genset in Manual mode.
Press this key and controller enters in Manual mode.
Press this key and controller enters in Auto mode.
Alarming sound off; If trip alarm occurs, pressing the button
at least 3 seconds can reset this alarm.
Close breaker in manual mode.
Open breaker in manual mode.
1) Screen scroll;
2) Up cursor and increase value in setting menu.
1) Screen scroll;
2) Down cursor and decrease value in setting menu.
1) Screen scroll;
2) Left move cursor in setting menu.
1) Screen scroll;
2) Right move cursor in setting menu.
Select viewing area.
1)Return to main menu;
2) Return to previous menu in setting menu.
and
simultaneously in manual mode will force generator to
ISSUE 2016-11-03
HGM9510 GENSET PARALLEL UNIT
Version 1.2
Page 11 of 64
Advertisement
