Table of Contents
Advertisement
Flame and heat setting
Once the fire is turned on the
flame setting defaults to level five
(on high). Use the up and down
buttons to control the height of
the flame and heat output.
The relationship between the flame
height and fan speed is preset and
cannot be adjusted. The Neo has
five flame and fan settings:
Flame height Fan speed
1
low
2
low
3
low
4
high
5
high
Black retaining bridge
Safety device that needs to be
removed before replacing the
batteries—DO NOT DISCARD, this
MUST BE put back on.
Pry point for removing the
back cover
Gently pry open the back cover
from the base of the remote
Turning on and off
This button switches the fire on and
off. For it to work the power button
on the fire must be ON.
Indicative room temperature
display
Displays the room temperature* (at
the point of the remote) and low
battery symbol if the batteries need
changing.
The back light will stay on for
approximately five seconds.
Constant activation will shorten
battery life.
* Checks the room temperature every minute.
N.B: Do not compare the temperature
readings from the remote and the app. The
readings are being taken from different places
and could vary significantly.
Battery retainer
Temperature sensor position
The room temperature is
determined by a temperature
sensor located in the bottom of the
remote. Please be aware the sensor
will be affected by direct sunlight,
draughts, and body temperature
(your hand).
Neo RIB2312 operation guide: 12149-A 01-17 | 9
Advertisement
Table of Contents
