Table of Contents
Advertisement
5.1 Installation and Login
After the installation is launched, the installation program will scan your PC for another
®
2N
version if identical with the new one. Use the system control panel Add or Remove
programs to uninstall the existing product version for reinstallation or reconfiguration.
If the versions are not identical, the original version will be uninstalled and a new
application version will be installed. Then you will also be asked whether the
configuration files should be retained or the application with an empty database should
be installed.
Now the 2N
instructions. Select the 2N
Files (x86)\2N TELEKOMUNIKACE\2N Lift1\ is used by default. Also define
whether the application shall be installed for the currently logged-in user, or all the PC
users.
Now the wizard is ready to install the 2N
account administration notification to the Windows system if necessary. Another Start
item and a desktop shortcut icon will be added automatically.
Tip
Note
Now the 2N
desktop (see the figure below) or select the Start item to start the application.
After the application launch, the splashscreen gets displayed to inform you of the
application manufacturer and current version. After the launch, you will see the basic
screen and Configuration / Parameters menu. Here an offline table of parameters can
be prepared for you to export the data. Click Connect device to get connected to the
CU and move to the Connect to device menu. Select the 2N
Connect to get connected to the 2N
downloaded automatically.
®
2N
TELEKOMUNIKACE a.s., www.2n.cz
Lift1 Service Tool version and ask you to uninstall the currently available
®
Lift1 Service Tool Setup Wizard
®
The wizard will install the USB port driver if unavailable to identify the
Central Unit connected.
®
The
2N
Lift1
Service Tool
space at least.
®
Lift8 Service Tool
Figure: 2N
has been launched. Follow the wizard
Lift1 Service Tool
®
Lift1 Service Tool
installation requires
is ready for use. Click the shortcut item on the
®
Lift1
Service Tool
®
Lift1 CU
installation location: C:\Program
. Confirm the user
500 MB
Icon
®
Lift1
COM port and click
. The configuration table will be
of free disk
62
Advertisement
Table of Contents
