2N Lift8 Brief Manual
Communicator for lifts
Hide thumbs
Also See for Lift8:
- User manual (377 pages) ,
- Brief manual (17 pages) ,
- User manual (185 pages)
Related Manuals for 2N Lift8
Summary of Contents for 2N Lift8
- Page 1 ® Lift8 Communicator for lifts Brief manual Version 1.0.0...
- Page 3 Components of Lift8 system Warning The components of the Lift8 system cannot be used outside this system. Audio units cannot be connected separately without the central unit and splitter! Object No., Description name ® Lift8 central unit, with no interface 918600 ®...
- Page 4 Operating instructions DTMF symbol: DESCRIPTION OF FUNCTION: ® Confirmation according to which 2N Lift8 (referred to hereinafter as “L8”) knows that a call has been successful. L8 silences the announcement being played and sends its confirmation signal, the call continues until the limit expires, and one of the following commands can be used.
-
Page 5: Important Warnings
Important warnings Warnings Before every removal of the upper cover of the CU pull the mains plug out of the socket! The live parts inside the CU have no contact protection, and the voltage is deadly! The CU must not be used without proper earthing! Before putting it into ... -
Page 6: Before You Start Programming
Programming: Before you start programming Use the prepared form, which is also a clear table of basic functions, and fill in all the values you want to change. If the L8 is not brand new, make sure that you have the correct servicing password, and if you are not completely sure how the L8 is programmed, always use full initialisation (Attention: The servicing password is also initialised!). -
Page 7: End Of Programming
If you only want to go back one menu, press ® Cooperating 2N applications ® Service tool ® The application is intended for remote supervision and configuration of 2N Lift8 communicators. ® Control panel The application is intended for the administration of users, lifts and authorisations. ®... -
Page 8: Technical Parameters
Technical parameters Range of operating 0-40°C temperatures Power supply 100-240V; 50/60Hz; 0.75A; 60W max. Built-in rechargeable battery 2 x lead rechargeable battery 12V, 1.3Ah Output of lift blocking relay, max. load 30V, 0.5A AC or DC Dimensions 300 x 170 x 72mm Weight 2.7kg The communication equipment does not contain any components harmful to the... - Page 9 Communication equipment – short programming form Range of Value after Value Notes, explanations Number and name of values initialisatio programmed by function 011 - 016 memory No 1-6 Alarm button (set 1) max. 16 The memory can be deleted empty digits by entering “number of zero...
- Page 12 2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Tel.: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz 1995v1...