Product Description - 2N Lift1 User Manual

2.1 Product Description

®
2N Lift1
phone line terminals, ALARM button, illuminated pictograms (according to standard
requirements) and CANCEL input (optional cabin door opening signal).
®
2N Lift1
lift panel (holes cut according to the drawing, see Mounting).
Operation
Press the ALARM button to activate the device. The "Wait" pictogram starts shining
immediately.
communication has been established.
Universal Design
The electronics board is located between the mounting panel and the cover printed
with instructions (see the figure). The total dimensions are 65×130×24 mm. The
speaker and microphone are mounted on the panel. There are basic (slide-on)
terminals to the left and extending modules (lift blocking, switches) to the right.
The small connectors in the lower part are intended for induction loops (for hearing
impaired persons) and LED indicators. Illuminated pictograms/icons (even with bulbs)
can be easily connected to the device. The pictograms and the ALARM button are not
included in the delivery as they are lift design elements.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
je a Speakerphone on principle. It is equipped with a microphone, speaker,
is supplied in the Universal design
The "Connection
. It is installed behind the pre-prepared
established" pictogram starts shining when
16