Function Description - 2N Lift1 User Manual

4.1 Function Description

Note
Outgoing Call
Press the ALARM button to activate
and sets up connection with the continuously working personnel or the control centre
(refer to Automatic Dialling for details). D
hear the dialtone, dialling, ringback tone and "Wait please, connection is being made"
or any other announcement if available. The announcement can also include the 2N
Lift1
the call, the parties can start speaking.
Check Call
A check call is an automatically made outgoing call whose purpose is to check the
function of the
different announcements ("Check call") and use different phone number sets.
Typically, check calls are received automatically if the control centre is equipped with
the 2N
VoIP account.
Incoming Call
The control centre can also call the
answers the line after two rings (or as configured) and sends a sound signal. The
purpose is to provide the person trapped in the lift with necessary information (about
rescue, for example) and check remotely whether 2N
properly.
Useless Startup Protection
As the only purpose of
when the door is open is considered useless. Hence, connect the door contact if
available to the
after ALARM pressing. In this case, if the ALARM button is pressed by mistake, the lift
arrives in the next floor and the door opens thus cancelling the call. Or, you can set the
minimum button pressing time to prevent unintentional ALARM pressing.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
The purpose of this section is to help technically trained persons get
insight into the processes running in
information is unnecessary for common 2N
identifying data (address, lift number, etc.). When the operation staff receives
®
2N Lift1
®
Lift8 software. All you need to operate the program is a standard PC with a
®
2N
®
2N Lift1 CANCEL input and program a connection establishing delay
®
2N Lift1 2N .
uring the call setup, t
system. Unlike common outgoing calls, check calls have
®
2N Lift1
Lift1 is to call help in case of emergency, any call made
®
2N Lift1 during operation. This
®
Lift1 installations.
®
Lift1 seizes ("picks up") the line
he person in the lift can
®
number. 2N Lift1
®
Lift1 is connected and works
®
automatically
53