Download Print this page

Package Contents - Vivo STAND-V102BDU Instruction Manual

Pneumatic arm dual monitor desk mount with usb

Advertisement

If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A (x1)
Base
F (x1)
Arm Support
K (x1)
3mm Allen
Wrench
2
WARNING!
B (x2)
Lower Arm
Spring Arm
G (x1)
Cable Clip
L (x1)
6mm Allen
Wrench
C (x2)
H (x1)
Cable Clip
Support Plate
M-A (x8)
M-B (x8)
M4x12
M5x12
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D (x1)
E (x2)
Pole
VESA Plate
I (x1)
J (x1)
Bolt
M-C (x8)
D5 Washer

Advertisement

loading
Need help?

Need help?

Do you have a question about the STAND-V102BDU and is the answer not in the manual?