Alert - Wired Device In Burst Mode; Alert - V1100 Failed To Join The Network; Alert - Radio Malfunction - GE Masoneilan VECTOR V1100 Instruction Manual

Timestamps:
Start: Set when the configuration issue if first detected.
Stop: Set when the configuration issue is corrected.
ALERT – Wired Device in Burst Mode
Description:
A wired device is configured for wired burst mode, which may conflict with the VECTOR
V1100 burst settings.
Corrective Action:
Change the configuration of the wired device to not be in wired burst mode.
Timestamps:
Start: Set when the wired burst mode message is first detected.
Stop: Set when the last wired burst mode message was detected.
ALERT – V1100 Failed to Join the Network
Description:
The VECTOR V1100 has failed to join the wireless HART network.
Corrective Action:
Check the Network ID and Join key set on both the VECTOR V1100 and the wireless HART
network.
Timestamps:
Start: Set when the wireless HART network Join procedure failed.
Stop: Set when the wireless HART network Join procedure succeeds.
ALERT – Radio Malfunction
Description:
The radio module inside the VECTOR V1100 is malfunctioning.
Corrective Action:
Report this issue to the factory.
Timestamps:
Start: Set when the radio malfunction was detected.
Stop: Set when the radio malfunction clears.
35