Battery Low Voltage; Battery Critical Voltage; Join Device To Network (Method); Network Id - GE Masoneilan VECTOR V1100 Instruction Manual

GE Oil & Gas

Battery Low Voltage

This is the battery voltage value below which the power status is set to Low and the battery
life remaining is 25 days or less. This is an independent failsafe check for the coulomb counter
remaining life calculation.

Battery Critical Voltage

This is the battery voltage value below which the power status is set to Critical and the battery
life remaining is set to 0 days. This is an independent failsafe check for the coulomb counter
remaining life calculation.

Join Device to Network (method)

This guides you through entering in the Wireless HART network ID and join key, and starting
the wireless HART join procedure.

Network ID

This is the ID of the wireless HART network to join.

Join Key

This is a 32 character hexadecimal password (broken into four eight character blocks), which
is used to get access to the wireless HART network.

Radio Output Power

The transmit power of the VECTOR V1100's radio can be set to either 0 dBm or +10 dBm.

HART Polling Address

This is the HART polling address used to communicate to the VECTOR V1100 on the
wired-HART interface using a HART capable host (such as a HART communicator or PC with
HART modem).
By default, the VECTOR V1100 is at HART polling address 15. Through the DD, the polling
address can be set to any value between 0 and 63.

HART Master Mode

This is the HART Master mode used by the VECTOR V1100 when it is communicating as a HART
master with wired-HART devices.
By default, the VECTOR V1100 is configured as a HART primary master. Through the DD, the
master mode can be changed to be either a HART secondary or primary master.
VECTOR V1100 Wireless Adapter
24