Commissioning - GE Masoneilan VECTOR V1100 Instruction Manual

Commissioning

On VECTOR V1100 power-up in the field, the VECTOR V1100 attempts to identify any connected
HART devices (if the Automatic Sub-device Detection option is enabled).
Verify operation using the VECTOR V1100 HART DD via a HART communicator or PC with HART
Modem, or via the wireless HART gateway interface.
With the DD, verify that the correct HART sub-device(s) have been detected by the VECTOR
V1100. Also verify that the VECTOR V1100 is attempting to join or has joined the wireless HART
network.
With the wireless HART gateway, verify that the VECTOR V1100 has been detected and that all of
the connected wired-HART sub-devices have been detected.
NOTE
NOTE
Install the VECTOR V1100 after the wireless HART
gateway has been installed and is verified to be working.
To speed the wireless HART joining procedure, turn on the
Active Advertising mode of the wireless HART gateway
whenever new devices are added.
49
5