Troubleshooting - I-Tech PHYSIO 4 User Manual

Precaution for the storage
There is no particular precaution to be taken during transportation of the
device, since I-TECH PHYSIO 4/EMG is a portable device. In any case it is
recommended to store I-TECH PHYSIO 4/EMG and its accessories in the
supplied carrying bag after each treatment.
Precaution for the storage
Store the device in a cool, well-ventilated place. Do not store heavy objects
on the device. It is recommended to switch off I-TECH PHYSIO 4/EMG at
the end of each treatment and to remove the cables from the connectors.
I-TECH PHYSIO 4/EMG should be kept in the supplied carrying bag,
together with the rest of the equipment supplied. The equipment is
protected up to the following environmental conditions (with and without
the packaging supplied):
Temperature
Relative humidity
Pressure
N.B. Disconnect the cables, before storing the device into its carrying bag.
If not, the cables could bend excessively near the connectors. It could
severely damage the cables.

Troubleshooting

In the event of malfunctions or problems in the use of I-TECH PHSYIO
4/EMG, check the following:
• I-TECH PHSYIO 4/EMG cannot be turned on. Check the state of charge
of the battery (see next paragraph Battery charging). If the problem
persists, contact the manufacturer.
I-TECH PHSYIO 4/EMG does not transmit electric impulses. Check the
•
status of all the connections, cables and applicators as indicated in this
manual. If the problem persists, contact the manufacturer.
I-TECH PHSYIO 4/EMG switches off during operation. It is
•
recommended to check the battery status, contact the manufacturer.
IACER Srl
from +5 to + 40 °C
from 15 to 93%
from 500 to 1060hPa
74 MNPG178